ProCurve 420 Instrukcja Użytkownika Pobierz pdf (Strona 36)

Known Software Issues and Limitations

■ System — When a software upgrade is interrupted (such as due to a loss of power), the

access point often fails on reboot. To recover, the access point can be booted to the previous

firmware version by using the boot command from the comand line.

■ Authentication — When using WPA2 over 802.1X with the radio set to b-only mode, wireless

clients re-associating with the access point perform full 802.1X authentication instead of

using cached Pairwise Master Keys. (18-01136)

■ Authentication — WPA auto-negotiation (security suites 8 and 9, for mixed use of TKIP/

AES security) does not work for client stations using WPA/AES.

■ Authentication — SVP phones may not be able to connect through an SSID interface that

is configured to use Security Suite 8 (WPA pre-shared key authentication using TKIP or AES

for unicast encryption and TKIP for multicast encryption).

■ Authentication — When using a multiple security setting of WPA-PSK + Static WEP +

Dynamic WEP + Dynamic WPA, clients using WPA-PSK cannot connect to the access point.

1 2 ... 31 32 33 34 35 36 37

Brak uwag

ProCurve 420 Instrukcja Użytkownika Strona 36