
29
Known Software Issues and Limitations
Known Software Issues and Limitations
The following sections contain limitations and known software problems in Release 2.1.7 for the HP
ProCurve Wireless Access Point 420.
Limitations
■ The CLI show system command does not show the MAC of the WLAN interface.
■ The access point does not support RADIUS MAC Authentication for WPA-PSK clients.
■ The parameters for the primary and secondary RADIUS server IP address do not accept a
host name. The IP addresses must be specified.
Software Issues
■ CLI/Web — When using the Web interface to set an SSID to a blank name, the configuration
is confirmed as saved, but the current SSID name remains unchanged.
■ CLI/Web — When using the Web interface to set an administrator user name and password
with invalid characters, the configuration is confirmed as saved, but the current user name
and password remain unchanged.
■ Interoperability — When using Cisco 350 Series client cards, the unicast throughput of the
access point is below 5 Mbps with power saving mode enabled or disabled. (18-00839)
■ Interoperability — When using a Netgear MA111v.1 USB wireless adapter, the unicast
throughput of the access point is less than 1.5 Mbps. (1000234762, 18-01023)
■ Interoperability — When using a D-Link DWL-AG650 client card and WPA-PSK AES
security, connectivity with the access point is lost. (1000234764, 18-01024)
■ Interoperability — When using a Linksys WUSB54Gv2 USB wireless adapter, the maximum
unicast throughput of the access point in any mode is around 3.6 Mbps. (1000234766, 18-
01025)
■ Radio — When set to pure 11g mode, wireless clients can still connect to the access point
using data rates 1, 2, 5.5, and 11 Mbps. (18-01126)
■ System — When broadcast/multicast filtering is enabled for the Ethernet port, the data
thoughput of the access point is reduced by 30-40% due to the filtering being performed by
software. (18-01134, 18-01135)
Komentarze do niniejszej Instrukcji