ProCurve 420 Instrukcja Użytkownika Pobierz pdf (Strona 28)

Software Fixes

■ CLI/Web — The Web interface accepts user names of incorrrect length without an error

message, but the values are not saved. (18-01115)

■ CLI/Web — The Web interface accepts a user name of more than 16 characters without an

error message, but saves only the first 16 characters of the name. (18-01116)

■ CLI/Web — Using the CLI to add a MAC address entry to the MAC authentication table of

an SSID interface and then trying to delete the entry, causes the system to fail. (18-01132)

■ CLI/Web — Using the Web interface to add a MAC address entry to the MAC authentication

table of an SSID interface and then trying to delete the entry, causes the Web interface not

to refresh properly. (18-01133)

■ SNMP — Saving a binary configuration file to a TFTP or FTP server using the object

enterpriseApFileTransferMgt fails. Although the SNMP transfer indicates a success, the file

on the TFTP or FTP server is zero bytes in size. (1000239011, 18-01068)

■ SNMP — When SNMPv2 traps are disabled, SNMPv3 traps are also disabled. (18-01114)

■ Interoperability — When using an Intel ProWLAN 2100 3B Mini PCI adapter card, a client

cannot connect to the access point using 152-bit WEP HEX keys. (1000239808, 18-01070)

■ Authentication — The access point 802.1X suplicant authentication fails when connected

to a switch port configured for multiple client support. To work around the problem,

configure the connected switch port for single client authentication only. (1000234170, 18-

01018)

■ Authentication — Wireless clients can still connect to the access point even when they are

set to denied in the local MAC authentication table. (1000237612, 18-01046)

■ System — The access point can experience wireless outages when the Ethernet port

recieves too much broadcast traffic. The broadcast traffic is serviced before all other traffic,

which gives the appearance of a loss of connectivity for wireless clients. (1000234336, 18-

01021)

■ System — Changing the management VLAN from untagged to tagged changes the tagging

status of default VLAN of an SSID from untagged to tagged. (1000239014, 18-01058)

■ System — When configuring the management VLAN as tagged, the system log messages

report the VLAN as untagged. (1000238105, 18-01065)

■ System — A text configuration file successfully uploaded to a TFTP server fails to download

successfully to the access point. (18-01124)

■ System — The access point default setting for the Preamble should be “Long,” not “Short

or Long.” (18-01147)

■ SNTP — The access point sets the SNTP server status to enabled after resetting to factory

defaults. The SNTP server default status should be disabled. (18-01072)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 36 37

Brak uwag

ProCurve 420 Instrukcja Użytkownika Strona 28